Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Greetings all, I am installing 1.3 on an ESX 6.0 with 32G RAM (planning on two nodes), 500G storage and one NIC, the installation is failing to a CLI without getting to the interactive menu. Below is a snapshot of cli, any suggestions?Thank you,Nabi...
Greetings all - We created a voice SSID and I only want to permit the 7925G phones to associate , any tricks besides using mac filtering?Thank you,Nabil
Greetings all - We are in the process of piloting eap-fast for mainly WinXP using CSSC, how we also lime to accommodate our Mac and Linux users. We figured out the steps for Mac, however Linux seems a little an obscured topic with eap-fast. Any wo...
Hello all - Can someone please explain to me how the ASA VPN cluster decision happens? We have two ASAs in cluster, and it seems the master is handing all the connections to the backup and not accepting any itself.I have searched all the documentati...
Hello all - We have a FE to our provider with two sub-interfaces, each interface in its own VRF. Each VRF (Sub-interface) has 3Mb dedicated bandwidth rate.Each VRF has different QoS requirements, for example VRF1 has various QoS policies for VoIP an...
I have noticed I was not installing the latest version, I downloaded the latest and did the checksum. The installation went very smoothly even with a 2 node cluster, the combination resolved the issue.Thanks a bunch for your suggestions.Happy Holida...
Yes, I mount ISO and the installation actually kicks in, see the pictures below. After sitting at the screen for a little bit, the installation drops to the command line. I am in the process of validating the checksum now, I will report back shortl...
Hi there.the ISO is on the same datastore as the VM, the datastore is an NFS mount to an external storage.I did not verify the checksum, is that a mandatory step or optional? I can certainly do the check in the meanwhile.Thanks,Nabil
Hello Simon,
Have you looked at the FlexPod design and implementation guides? These are Cisco Validated Design documents developed by Cisco and NetApp, the documents details the implementation covering your questions.
This is the landing page, pic...
