About a.grauso

a.grauso · 06-13-2003

After the command: copy running-config startup-config on GSR-12416 with two GRP in redundancy mode, the output is:Building configuration...[OK][OK][OK]What's the meaning of each OK ?First= save config in primary grp nvramSecond=save config in seconda...

a.grauso · 11-11-2004

Connect on 800 console and type "sh ip interfaces brief" to know which type of interfaces you have and numbering.Now you can follow Cisco manual and configure the right BRI interface you have.Alex

a.grauso · 11-11-2004

WS-X6704-10GE Environmental ConditionsOperating temperature: 32° to 104° F (0° to 40° C) Storage temperature: -40° to 167° F (-40° to 75° C) Relative humidity: 10 to 90 percent, noncondensing Operating altitude: -60 to 4000 m From data sheet CISCO CA...

a.grauso · 11-11-2004

Maybe "sh caller ip" .Let me know. Bye, Alex

a.grauso · 11-11-2004

Try this command:copy ftp:[[[//[username[:password]@]location]/directory]/filename] flash-filesystem:[filename]example:copy ftp://user:psw@x.x.x.x//ftpdir/rsp-boot-mz.122-23.bin bootflash:Alex

a.grauso · 11-11-2004

There's a bootflash on I/O controller which contain c7200-boot-....bin release. IOS c7200-pv-....bin will be on pcmcia card (slot0: or disk0:).You are actually running c7200-boot and not operating system IOS.Check configuration-register is 0x2102 wit...

Member Since	‎02-05-2003 05:06 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	20
Total Helpful Votes Received	32

User Statistics

User Activity

OK-OK-OK meaning in 12416 copy config in nvram

Re: 800 series router IOS question

Re: Temperature of WS-X6704-10GE card

Re: ADSL & Caller-id

Re: copy ftp flash function changed?

Re: (boot) in command line prompt