Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello there,We have a 4500 series switch that is running around 39% cpu utilization but seems to be dragging a bit. I did a show platform health and GalChassisVp-review has a target of 3% but an actual of 17%. All other actual values were at or be...
Hello there,I can't seem to find exactly what I need out in the forum - we have 6500's running IOS s72033-adventerprisek9_wan-mz.122-33.SXH5.bin and we want to upgrade to VTP 3. I had heard that vtp 3 does not run with a sup720-3b but I ...
Hello there,Someone is the office asked about connecting a printer to the pc port of an IP phone (7941). I can't find anything on Cisco's web site that gives guidance for this. We plugged the printer to the pc port of the phone and tested it - we w...
Hi there,I can't seem to find how to retrieve a parked call - specifically, if I park a call and forget the number the call got parked on, how can I get that call back?We're using basic call park. I had read on one of the Cisco docs that I could hit...
Hi there,I'm in an interesting situation where I have a customer whose end users are connected to legacy PBX and have Unity Connection 7 for their voicemail. I have no visibility into the UCM6 to see how it is configured but the end users are intere...
Aru,Thank you very much for the information. We do have quite a number of PoE linecards in the switch and it is running an older IOS. Will provide this extremely helpful info to my management.Kiley
That's good to know others have hooked printers into the pc port of a 79xx phones and not had problems. I know it's uncommon, obviously, since I could find no information on the web regarding it but I knew if I came here someone would know!!!!Thank...
I'm having the same issue where I cannot disable web access on my 7941's, regardless of what kind of combination I use with device type. We're running 7.1x. I've been able to get all the other device types queried successfully but this one, not so ...
