Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi all i am having problem configuring ospf wih ipsec between 2 asa.i have followed he configuration example as it is on the cisco website. bu still the ospf neighbour doesn;t up on the outside. ipsec is working fine.has anybody tried this before.any...
hi all i am having problem configuring ospf wih ipsec between 2 asa.i have followed he configuration example as it is on the cisco website. bu still the ospf neighbour doesn;t up on the outside. ipsec is working fine.has anybody tried this before.any...
hi all i have configured a webvpn group on asa. i have configured 2 url-list one for a internal website and other for a file shareurl-list cisco home http://www.cisco.comurl-list share myfiles cifs://customer2007in the group-policy for the webvpn i a...
hi all i am trying to setup asa failover using the management interface.asa1int e0/0nameif insideip add 10.1.1.1 255.255.255.0 standy 10.1.1.2no shint e0/1nameif outsideip add 1.1.1.1 255.255.255.0 standy 1.1.1.2no shint m0/0no shno management-onlyin...
hi all i am having a silly confusion abt the protected ports.in the documentation they have mentioned that 2 protected ports cannot talk to each other.they can only talk via layer-3 device.does it mean that 2 protected ports should be in the differe...
hi marcabal thanks for ur reply once again. sorry for the delayed reply i was out of town. mate i am using a 3550 switch and i didn;t have to configure the destination span port as the trunk port but i could still the vlan tags in the events. regards...
hi marcabal thanks a million for ur detailed explaination man. ur explainations are better than cisco documentation to be frank. yeah on the ids events i can see the events being generated for the correct signature. and also in the events i can see t...
hi marcabal here;s my setup and i am facing some weird problem in it.,i have a single switch with 4 routers and ids.F0/1 IDS SENSING INTERFACE IN PROMISICOUS MODE.F0/2 R1 ON VLAN 10F0/3 R2 ON VLAN 10F0/4 R3 ON VLAN 20F0/5 R4 ON VLAN 20R1 and R2 are o...
hi marcabal can u pls tell me that when we are normally connecting the ids sensor port to the switch. we leave the switch poert to the dynamic state right. we don;t configure the port as a access or trunk port. so when using a alternate interface for...
hi i got the answer u we can add multiple url-list in the webvpn group-policy. all we have o do is set the url-list name to one name. the u can use multiple url-list in the same webvpn group-policy.regardssebastan
