Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All,I have Cisco 1841 Router with e ports - fa0/0 and 0/1. 0/0 is configured for vlan trunking and 4 subnets are configured.default gateway for router is inside IP of Pix 506 e 6.3(4). The IP details are below.Fa0/0 - 192.168.165.910.1 - 192.168...
Hi ,I have one VPN configured over Pix 506-e 6.3(4) for a site with remolte local network is 192.168.128.0 255.255.255.0.Now I have told to configure new VPN for another site for that the remote LAN is 192.168.128.0 255.255.252.0When I configured thi...
Hi All,I have Pix 506e-OS-6.3(4)configured in LAN of 200 systems.This pix is giving a strange problemIt blocks IPs randomly only for the SMTP port. All other TCP services can run without having any problem.And if I change the ip address of that PC or...
Hi All,I am facing a strange problem with 501 firewall IOS 6.1(1) .. We have establishd a VPN connection to a network with address 156.135.0.0 and its working fine...the problem is that when i try to open the site that is on ip address 156.135.x.x th...
Hi all, Current Scenario –Internet->2600Router->Cisco 501 Firewall->7 2950 Switchs based LAN on 192.168.165.0. with 150 users.Asked to . – Create and configuring 6 VLANs behind Firewall.Questions.How I’ll be make firewall see all Vlans with different...
Hi Amit,I get route already connected error on ASA when configuring route.only one default route is configured on ASA - 0.0.0.0 0.0.0.0 outside (public ip)its not letting me to insert any route.Any suggestions.?Thanks,Siddhartha
Hi Amit,Thanks for reply. The complete network diagram is below.VLANs--->Router(Inside192.168.165.91)--default gateway-> Pix1(same subnet.1) --> outside (public IP)Router port fa0/1(192.168.60.2)-->ASA Gig0/2( 192.168.60.1) ASA 0/0 - Public IP.Router...
