Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, is it just me or the software.cisco.com website is down often since a couple of weeks? I try on 3 different internet connection and it's the same on all of them. I'm often getting a HTTP Status 400 – Bad Request response when trying to access ...
Hello, we received some Nexus 9k and I just want to know if the provider "installed" the NXOS to make sure it's not unpacking the bin file each time it boot. I'm pretty new to those Switches and the documentation did not clearly pointed me to the ...
Hello everybody,I have an issue with one "redundancy link" in between one of my service building and my secondary site. All my links are 1Gbps fiber using Genuine Cisco hardware. I try to add a link between 2 switches and when I no shut the interface...
Hello Everyone!I'm trying to configure a pair of 9120AXE into a bridge and after some reboot (changing the ap from capwap to workgroup, back to CAPWAP, then eWc, up grading the image, etc) it seem that the access points are always end up glitching on...
So, the LXC mode is always booting from NX-OS.bin file but have the advantage to be able to perform live updates (if there is no disruptive operations between 2 NX-OS version) that is a great feature in our environment. So I guess that it answered my...
Even if we had changed the switchport 2 times before on the side that we had the down/down interface (at first we were using g1/0/1 then g1/0/2 then g1/0/3), by running your test we managed to detect that those 3 switchports were defective (nothing w...
I found it it was "show interface switchport"SERVICE_BUILDING1 output:Name: Gi0/21Switchport: EnabledAdministrative Mode: trunkOperational Mode: trunkAdministrative Trunking Encapsulation: dot1qOperational Trunking Encapsulation: dot1qNegotiation of ...
The "Show switchport interface x/x" command is unreconized. Might not be exsting in those IOS versions.The show errdisable command is incomplete in both switches. I had the choice of:detect Error disable detectionflap-values Flap v...
