Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi @shaharshad ,
Yes, you are correct. Cisco recommends upgrading Nexus 9k switches from 6.x to 7.0(3).l7.4 in two stages:
This is because there are a few caveats associated with upgrading directly from 6.x to 7.0(3).l7.4. For example, if you are ...
Hi Cokho,This video provides steps for configuring MTU on a Nexus 9000 switch. The video outlines the need for proper MTU in the network and explains how to remedy MTU related interface errors, via interface MTU configuration. https://www.youtube.com...
Hi Berk,This video provides steps for configuring MTU on a Nexus 9000 switch. The video outlines the need for proper MTU in the network and explains how to remedy MTU related interface errors, via interface MTU configuration. The time stamp 0:52 is w...
Hi Terry,There is a couple different senarios that allow for Jumbo frames. This process is done with adjusting MTU size. The following commands are for configuring MRU on a Layer 3 port
Nexus(config)#interface ethernet 1/1Nexus(config-if)#no switchpo...
Hi Terry,There is a couple different senarios that allow for Jumbo frames. This process is done with adjusting MTU size. The following commands are for configuring MRU on a Layer 3 port
Nexus(config)#interface ethernet 1/1Nexus(config-if)#no switchp...
