Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Have 2921 router with permanent license for uck9. Upon upgrading ios from cme 8.1 to 8.8 version, need to accept EULA and went to 60days evaluation.From research, the Evaluation license automatically rolls over into Right to use license after 60 ...
Hi,I am trying to configure UC320 to use access code 9 for dialing out but i could only see 9 + 7 digit and 9+10 digit as dial pattern.Is this customizable?What i am trying to achieve is 9+ 7 digit and 9 + any digit going out to FXO trunks. Is their ...
Hi,Can someone point me to the right direction on how to assign long distance call restriction on selected phones.So far phone registration, AA, voicemail, outbound call using access code of 9 is working. Can't seem to find out how to restrict one or...
Hi,Is there a way to provide CAC bandwidth control of incoming calls on one SIP trunk and to be separated per classification by configuring CCM7 alone?For example:PSTNA ----sip trunk---CCM7----Phone1A --Phone2A ...
Hi,I'm trying to troubleshoot and incoming call from SBC to CCM SIP trunk. Outgoing call to SBC from IP Phone works fine. using G711ulaw codec without security.Topology:SIP server ------------SBC(SIP)---------CCM7-----IP Phone(SCCP) ProblemI'm gettin...
Hi Rob,Just making sure i understand correctly, the SPA504G is only supported on U5XX and not Callmanager express on cisco 2800/3800/2900 routers?I though SPA504G supports SIP? if it supports sip, then i am under the impression that it should be able...
Hi,Does anyone know what part number for the "LicMaxRecLenIsLicensed" to order? It seems not included in the PUT.We opened a TAC case as well as inquired from cisco licensing team however they could not provide the product part number to order. TAC a...
Hi Ahmed,Yes. Got help from other site.CCM is rejecting the P-ASserted Identifier.03/03/2010 10:17:26.206 CCM|//SIP/SIPHandler/ccbId=0/scbId=0/checkSyntaxAndSelectAssertedHeader: PAI result [16], total[0], sipUri[0], sipsUri[0], telUri[0]|<:STANDALON...
Hi Aaron,Our goal is actually to restrict the number of incoming calls that is routed to each ip phone on each branch.The provider told us that they do not support restricting number of calls sending to each site and were hoping CCM could actually wo...
