Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i telnet 2620XM and unable to connect, when i login to console its show" Low on memory; try again later" what to do i am not able to connect both by telnet and console.need urgent replythanx & RegdsNaveed
i telnet 2620XM and unable to connect, when i login to console its show " Low on memory; try again later" what to do i am not able to connect both by telnet and console. need urgent replythanx & RegdsNaveed
i have pix515E IOS 7.04 installed at my network. yesterday i worked and configure pix interfaces, static NAT, syslog, static routes and access-list and then i left the next morning i came office and try to use NET there is no response, i check syslog...
I have three different Network on Three different Vlans and i want to connect every Workstation who is going to connect with its network get ip from its dhcp pool from switch. what is the configuration please helpVlan1 ===> 10.10.10.0 /24Vlan2 ===> 1...
Recently i join a new company where i find very unstructured network we have three cisco catalyst 2950 one Cisco 2620 router, three 3com 4420 manageable switches and seimens wireless lan (Gigaset SE505 cable/dsl router / bridges) and few un-manageabl...
i allowed the PC to ping to PIX but only the inside interface didn't response, when i reboot the pix it start responding. i didn't understand the problem why pix behave like this, please help and thanks for response.
mohammed solution is temporarily, i do the same and my problem solved, i have 12.2(15)T14 IOS installed in my router 2620XM. please advised how much the IOS required memory or should i upgrade it. during reboot i didnt find any error regarding memory...
The best way to monitor from ISA is the GFI Languard.you can find it on isa.org website, but if you are using the pix and want to monitor your clients the best way is the websense . All you have to configure the URL server and filter option in pix. W...
