Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 5 switches with links going to each other in a star topology. Now, Switch 3 is the root bridge but when i power it off it takes about 12 seconds to switch over to switch 2 which is configured to be the next root bridge if a failure occurs. Doe...
I am having connectivity issues with management/enterprise depending on my default gateway. Depending on which gateway I am using I will get connectivity and won't with the other port. Enterprise and Management are on different VLANs and different sw...
I am looking for some guidance on how to configure a server port on our core switch. For some options, I was thinking this:Option Ano switchportno ip address Option Bswitchportswitchport accessswitchport access vlan 105or does this accomplish the sam...
I have AP C9130AXI-B showing 0DB on AP Channel Noise in prime throughout the day. Currently, the controller is 9800. I also am having issues with iPhone users connecting and disconnecting from these APs. I'm not sure if it's an iPhone issue or if it ...
I have 4, the additional being the CIMC. I also do not know what hardware model we are using. I am assuming DN2. Currently, we do not have an internet port configured. So, I configured the default gateway on the Enterprise port. The cluster is on a p...
Thanks for the link, much appreciated! Since my management and enterprise ports are on different networks and the maglev setup only allows me 1 gateway for the device. When I try to apply a gateway on the management port it says "gateway already appl...
