Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiWe have 11 * 3750x switches configured into 3 seperate stacks (3,4,4), I clustered them together,one of the Hostname on one of the stack changes name as though it did not originally have a hostname, If I change it back again it reverts back to the ...
Hi,We have 2 * 3560 switches only configured for L2 (etherchannel between them) there are 2 * 3800 (12.4) routers configured with HSRP each router is connected to a different 3560 switch. There is a problem that is sporadic where it is not possible t...
Hi,I have clients connectiong to a Router (878)using the VPN Client, they can access what they need internally.A new requirment has come up, there is an externally hosted server that has IP restrictions so that only a range of internal addresses can ...
Hi,I am struggling with dns resolution from a machine located in the dmz. The Inside machines are ok but I want only 1 machine in the Dmz to be able to access the Internet. I have configured the following and I can use the IP address in the browser ...
HiI have one ISP (with ADSL Backup) which provides a 10MB ethernet connection, I would like to provide router resilience , I was thinking of connecting a switch to the ISP connection and then connecting each of the 2 routers to the switch and run HSR...
Yes I am talking about clustering, I already have 3 switch stacks all with different names Core, Lan, iScsi, when I add them to a cluster, the Lan stack changes hostname to Core-1.If I remove the Lan stack from the cluster and rename it from Core-1 b...
Hi Chris,Thanks for responding,There are no subordinate switches however there are 2 ASA's Active/Passive. I am not sure about routing between the two routers as they are managed by someone else but I would imagine there is routing. Switch a is the ...
Hi Rahgovin,Thanks for responding, I noticed that I had specified TCP in the access list even though I had added domain to the port object group.Thanks for your Help.
