Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am upgrading a UCS E160S module from CIMC/BIOS Firmware Ver. 3.1 to Ver. 3.2.10 via CLI using an FTP Server. The reason for the Firmware upgrade is due to Adobe Flash no longer being supported on modern Browsers, as Adobe Flash is required in Ver ...
Cisco IP phones attached to a Moduke in one of my Cat6500 access Switches suddenly went down. Upon closer inspection of the Switch Sys log, I observed the following Sys log error messages: [Module 9 is experiencing the following error: Inline Powe...
I just upgraded a Cisco 871 VPN router ios from c870-advipservicesk9-mz.124-24.T.bin TO the newer version >>c870-advipservicesk9-mz.124-24.T1.bin. Upon completion, I reloaded the router only to get the msg - Booting flash:/c870-advipservicesk9-mz.1...
I configured and shipped a Cisco 871 VPN router to a remote office overseas. Upon connecting to the WAN there, we discovered the config was gone. I know I configured it. Anyway I had the tech cut and paste the config into the router again, saved it, ...
I am upgrading a 5 user remote site from stand alone DSL to T1 P-to_P to regional HQ. I am deciding between a 2811 w/a Switch or a 2821 with a T1 module and Ethernet modules. I'd like to know which way to go, esp. cost wise and parts# needed. Thnx a ...
Thanks for the suggestion, Leo. I am going to give that a shot afterhours today, and see how it goes. From some previous posts I have seen, the issue appears more related to one of the Power Supply Mods, as opposed to the Blade Module in slot 9. I s...
Thanks Peter, I was able to get TAC and worked with them to fix. But weird thing though, my config remained on the router and became the default when I tftpdnld'd the replacement IOS. I no longer see the config.text file, but that's okey, it works. B...
Erase is not an available option in rommon on the 871.Fromat is available and rmdir is available, but I have no experience with their use in this mode, any help?
