About rescueskier

rescueskier · 08-03-2009

I have a primary and failover unity 4.0(4) servers. It is has licenses for 660 subscribers and that is being shown on both servers. When looking at the status monitor on both servers, the primary shows I have 660 subscribers, on the failover, only 50...

rescueskier · 07-17-2008

I have a new office located in London UK. I would like to setup toll bypass so if a user in the UK dials a US number, it will use one of my gateways located in US. I have loaded the UK dial plan 31.0 I have tried to setup a dial pattern of 9.001! and...

rescueskier · 07-09-2008

I am having an issue setting up a fax machine connected to a VIC2-2FXS card. The issue is that when I dial in with the fax machine connected, it goes directly to a dial tone. If I dial 9 and a number I can place a call. (not the desired result) If I ...

rescueskier · 04-23-2008

Background, in my HQ, I have CM 4.1.(3)sr4d with connection to 3845 routers as my PSTN gateway. My remote offices are connected with MPLS links. I have users in my HQ that establish Meet Me Conferences and users from the remote offices join in, and...

rescueskier · 03-12-2007

Can I take a 4.04SR1 DiRT backup and restore to a 4.05 fresh install? Planning on running a fresh install of 4.05 on Windows 2003 and connecting to Exchange 2003

rescueskier · 08-03-2009

On the primary, there were 7 errors, but they are minor issues. On the secondary, hundreds of errors. I see a TAC phone call in my future.

rescueskier · 07-27-2009

Check the wire you are using. I have had issues with FXS cards and you are using a 4 wire phone line. Try a 2 wire that only has the green and red pair in the center.

rescueskier · 08-07-2008

We did up grade the code to 12.2(44)SE2 and I have not had any reports of issue from the local administrator. We are in a point of our production cycle that does not allow him to test. I won't know more until late this month (August).

rescueskier · 07-21-2008

I have tested my solution with the help of your input and it works perfectly. Thanks.

rescueskier · 07-17-2008

Ok, in CCM 4.1(3) it will not allow multiple dots, but it got me thinking.I created the route pattern of 900.1! I did a discard digit of PreDot. I had to add back the prefix digit of 9 since I do all my final dial patterns on the router. It works....

Member Since	‎10-20-2005 12:29 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	17

User Statistics

User Activity

Unity 4.0(4) failover subscriber issue

UK to US toll bypass

FXS / FAX issue with 2821 router

Meet Me quality degrades after 20 min on WAN link.

4.04SR1 Dirt to 4.05 Upgrade

Re: Unity 4.0(4) failover subscriber issue

Re: Analog Line - No Ring but Call Connects

Re: 3750 PoE issue

Re: UK to US toll bypass

Re: UK to US toll bypass