Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
A little off topic here so sorry if I'm not abiding by any rules here...Anyone using Ubuntu here?? Secondly, anyone using it to connect to Exchange using WebDAV (i.e. OWA)?? I'm trying to but the performance is horrid. Overall, I'm trying to get a...
I am looking to change the inactivity timeout using a parameter map. Was planning to apply policy-map for this globally and was wondering if I would affect existing connections or does it only apply to new connections??-Lloyd
Anyone have an idea?? What I'm trying to do is to authenticate management access to an ACE 4710 against a Microsoft IAS server. According to the document below:http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliance...
Anyone here ever use or configure a IPSec VPN SPA in a 6500 for terminating a large number of users (~6000)?? I posted this just to hear some thoughts on it. Thanks!-Lloyd
Hey all,I'm trying to configure failover on a pair of ASA 5510 firewalls. Both are running Security Plus Licenses. How I have know PIX and ASA failover to work is that each interface on both firewalls have addresses on the same subnet and the addre...
Agata,VLAN-based Ethernet over MPLS should be configured on subinterfaces. See link below. http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/pfc3mpls.html#wp1252154HTH.-Lloyd
Anyone know what line cards are supported for IP BFD and dual-active fast-hello?? Is it any line card that is supported on a VSS chassis (any 67XX) or does it need to be specifically 10 GE? I'm thinking not on the latter but I thought I'd ask.
Did 'show interface' not help you??http://www.cisco.com/en/US/docs/security/fwsm/fwsm32/command/reference/s3.html#wp2754219"Usage GuidelinesYou can use this command to display the status of interfaces. You can specify the ID (as either the VLAN or th...
