Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,i have a WLC module inside a 2811 router. everything is working (ap connecting, administration) except traffic from WLAN is not leaving the wlc to the router. The wlc is sending the dhcp packages to the default gateway (asa5510). See file wlc_dhcp...
Hi,i have the problem finding a similar command on ios. on my asa, responsible for wlan vpn, i have a command like this: group-policy mygroup attributes vpn-filter value vpnclientthat applies the access-list vpnclient to every user logs into (Cisco V...
Hi,release notes for wlc software 5.x state that it is possible to use a sniffer AP and wireshark to capture radia data. Setting up the AP is described but how do i setup the wireshark workstation to retrieve the traffic? Is there something like a da...
Hi,i have a 2821 hooked up to my isp and my lan. the isp interface is configured with a ip only routed inside the isp network. the inside ip is routed worldwide. now when i try to connect to a network outside the isp directly from the router the pack...
Yes, but they send me a patched windows version. cant work with that because i have no Windows sniffer at my monitor ports. anyway, i have deleted the software, sorry.Martin
Because the ASA is handling the WLAN Traffic (Firewall, VPN) and not the 2821. Also 6 WLC440x at our main locations are setup the same and they are working . Martin
Jon,perhaps i should describe the setup in more detail:i have a ip pool /28 where some service people can log into our network. every company gets its own vpn group/group pass and user. They all get a ip from the same pool but do not have access to t...
fella5,i have double checked and you are right. After joining wlc the syslog messages disappears. But the also diddnt hit the syslog server. i will investigate further.M.
