Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have following problem:I configured LAN segment that we are using to take backups from servers as isolated private VLAN. Backup server itself connected to the VLANs promicuous port so all the servers normally have access to it. For a month ago r...
Hello,We have the following problem appearing in our environment:All connections from remote sites dissapears unexpected from AS/400. After 2-3 minutes remote users get normal connectivity again.The environment is the the following:Frame Relay/ATM WA...
Hi,I'm not quite sure but I beleive that the drops occurs on SVI interface due to the following: when packet from one VLAN comes and the switch decides to route it to another VLAN it comes first internally to the SVI interface and then to the physica...
Try to configure Etherchannel between the switches...http://www.cisco.com/en/US/tech/tk389/tk213/technologies_white_paper09186a0080092944.shtml//Mikhail Galiulin
So this VLAN is used only to connect two 3750 switches? All your traffic (rdp, telnet, voice) is coming to the VLAN from other VLANs, right?One more question:Have you any empty ports on the switches?//Mikhail Galiulin
Hi,Check the nature of these drops. Larger buffer can help only in case traffic has short time peaks and rest of the time is on "normal" level. But if traffic is constantly on higher level than the switch can proceed than you need to increase capacit...
