About timothy_MTS

timothy_MTS · 08-20-2024

Hello everyone,I was working on a project to setup an unused switch I found from the storeroom. It was being used before but now I have just wipe the configurations by "write erase" and I have also removed the vlan.dat. I have also updated the ios in...

timothy_MTS · 08-06-2024

Hello everyone,Our network infrastructure is with two Core Switches (c93180) and a few stacked Access layer switches (c2960XR). We are now preparing to do some testing on making use of the NDI to transfer the video. Currently the devices that transmi...

timothy_MTS · 04-30-2024

Hello all,Recently there is a request from my user to use a software "Sonobus" that can allow other users to join together to share their audio recording. This looks like to be the peer-to-peer UDP traffic. Sonobus I decided to go ahead for testing i...

timothy_MTS · 08-29-2023

Hello everyone,I am trying to make my AP C2600 to join to my exiting Virtual Wireless controller which has already controlling over 10 units. They are c2700 series.The AP C2600 was used and connected to other Wireless controller before but it was dec...

timothy_MTS · 08-22-2023

Hello,I recently got a complain on the internet streaming through our internal network going out to Youtube or Facebook.In the normal hours, we are working fine, no one complain about the traffic or the streaming, smooth on everything.But during some...

timothy_MTS · 08-22-2024

Yes. Thanks. I think according to DanielP's explain. That breakout cable on Te1/1/x, so we got 4 x FortyG ports, and each cable can split into 4 (each one is 10G), which is 4 x 4 = 16 ports, and exactly the number I have in the show running config. T...

timothy_MTS · 08-21-2024

I didn't factory reset this switch. So do I need to do it?I see. Will do the 2x Fo and form the PortChannel for that. Very great suggestion. Cheers,Timothy

timothy_MTS · 08-20-2024

Lucky that I found an old c3850-48XS switches from our stockroom. Now it's the time to think of how to plan the link with the core network. Mostly I will trunk the c3850 into the two Core Switches. Thanks a lot.Cheers,Timothy

timothy_MTS · 05-22-2024

Good news that I can finally find out what's missing from the configurations.They split into two parts. One is application connecting to the server. The other one is the UDP for audio connectivity.The application itself did not mention in any where o...

timothy_MTS · 05-16-2024

Hello @MHM Cisco World ,Sorry that I may make a mistake on what I said. It is actually something like the drawing below. All the outbound traffics are through the many to 1 NAT. I think this is properly the normal setup as usual.I setup a machine wit...

Member Since	‎02-16-2023 05:56 PM
Date Last Visited	‎08-29-2024 05:40 PM
Posts	44
Total Helpful Votes Received	8

User Statistics

User Activity

Cisco 3850-48XS uplink to two Nexus switches

Network Switches with NDI traffic

Peer to Peer traffic through ASA 5516

AP cannot join to Wireless Controller

Monitoring traffic

Re: Cisco 3850-48XS uplink to two Nexus switches

Re: Cisco 3850-48XS uplink to two Nexus switches

Re: Network Switches with NDI traffic

Re: Peer to Peer traffic through ASA 5516

Re: Peer to Peer traffic through ASA 5516