Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I want to log to my syslog server the IP that a VPN client receives from the locally configured pool on my ASA for both IPSec and SSL VPN connections. Does anyone know the logging configuration I need to capture this information?
I am attempting to preform AAA and certificate authentication for a specific profile for AnyConnect clients hitting my ASA5550. I am running 8.2 and have everything working except when I turn on the certificate matching. I am wondering if certificate...
Hello,I have a 3Gb layer-2 ether-channel between (2) 6509s running IOS. It currently runs at about 2.5Gb during peak hours.What I've noticed though is that utilization on the individual links is not equal. 2 run at about 95% while the third runs at 8...
I have my WLC configured as follows:management intf - 10.10.254.42ap-manager intf - 10.10.254.41Both are untagged, and the switch port has the native vlan set to 1.However, I am unable to reach either address from any other subnet. What gives?
I am having trouble getting my Call Managers into CiscoWorks. The switch that they connect to is discovered, and CDP sees them properly. IP Phones are discovered, but are not listed under IP PHones in User Tracking. I have snmp protocol connectivity ...
OK, I've got SNMP working and am able to perform snmpwalks to the Call Manager. I have run an acquisition job, but still am not getting any IP Phone information populated into Campus Manager.The phones appear as standard users under user acquisition....
I have verified both the snmp RO and RW strings are correct, and do not have restrictions on access at this point. Offhand, does anyone know what the starting OID should be when performing an snmpwalk from Device Center? Would not having this right c...
