Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Attempting to setup aaa authentication using Radius, withability to fall back to locally defined accounts.configuration is;aaa authentication login default group Radius_Auth noneWith N1KV we are unable to add "local" as an option after a group, as we...
Is there a way to control the additions of a VM to a Port Profile until proper approvals?Part of our process for deploying machines in the DMZ, is to ensure the machine (real or virtual) meets certain criteria (hardening, patching, virus, ...). Secur...
After upgrading to 12.4(24)T1 from 12.4(15)T3 we experienced time synch issues. Topology is 2 IOS Routers as source for NTP at different Remote WAN sites over MPLS. Configuration is;ntp source loopback0ntp server x.x.x.x preferntp server x.x.x.x Prio...
We currently have login on-failure configured, but have found the user information is blank for Telnet sessions. Whereas SSH failed logins DO show the user information. We are running IOS 12.4(22)T. Is this expected or possibly a configuration settin...
Attemptiong to associate usernames with specific views once they login. Views have been successfully created and associated with username, but when the user logs in - they have to enter "ena view xxxx" before the view applies to them. My understandin...
I have gone up to 2 days and haven't seen the NTP get synched. For this one particular router I have psted the output in for, it has been over 2 hours now and still no time synchAs to the bugid, I do not have it. I do know that at 12.4(24)T and I had...
12.4.(24)T1 was needed to correct a different problem - missing userid on failed telnet logins. That one we need for audit purposes.I was able to confirm with ntp debug info that the packets are being sourced from the loopback - so it looks like ntp ...
Here are the results we are getting;.Aug 19 17:37:21 edt: %SEC_LOGIN-4-LOGIN_FAILED: Login failed [user: ] [Source: 10.x.x.x] [localport: 23] [Reason: Login Authentication Failed] at 17:37:21 edt Wed Aug 19 2009.Aug 19 17:37:25 edt: %SEC_LOGIN-4-LOGI...
