Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to configure a router but ISP provided address doesn't match up. range: 10.30.153.1 to 128 subnet mask: 255.255.255.0Gateway: 10.23.99.1If I use any IP from the range above on Windows XP, I can connect to the internet. The ISP said it shou...
Just recently, when calling local numbers in one area requires area code to complete the call. No changes in Callmanager regarding the dialplan. attached is the ISDN Q931 debug.
Is there a log or a way to know if a call was attempted but cancelled on the last minute or if other line is busy?Users of IP Phones and Softphones says they called other users but line is busy. I need to find a way if they really tried to make a cal...
Internet VPN or IPL for IPT?I would like people's opinion on the follow scenario. Which would you choose in terms of budget then performance? I know everyone will choose International Private Line (IPL) or leased line for performance. But we have som...
I'm having problem starting Cisco IP Softphones on some computers. There were no error during installation. softphone version is 1.3.3. Computer is running Windows 2000 Server OS, newly installed. Re-installed Softphone 3 times already. Also tried us...
Hi Brett, Do you have a visio stencil for the C4500-X rear (with power supply)? I only see front views from the Cisco site. Or is there a product stencil similar to the C4500-X rear? Thanks.Regards,Riann
Try to remove the following:ip nat pool mypool 10.10.10.2 10.10.10.2 netmask 255.255.255.0ip nat inside source route-map nonat pool mypool overload And replace it with:ip nat inside source route-map nonat interface dialer1 overload and return the cry...
Giuseppe,Hi!I just reviewed my original post. I forgot to mention that the IP were changed to private IP numbers for security reason, but keeping it close to the original IP as much as possible.The IPs that was provided by the ISP are all public rout...
After I've added the following:ip route 0.0.0.0 0.0.0.0 fa0/0no ip route 0.0.0.0 0.0.0.0 10.23.99.1I can now ping the gateway (10.23.99.1) but still no route to the internet. I cannot also ping any other IP outside/past the 10.23.99.1.I was told by I...
