Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I need to run a GuestPortal with multiple locations around the world.By default the ISE location is linked with SanJose - of course its changed to my DC location (actually UCT) but my question is how it works against time zones and access valid...
Hello,I have issue which can be observed as high retransmissions and interference level (40% and more) in both (!) 5 and 6 GHZ spectrum. This happened only during business hours.-open space with mostly glass walls, 5 floors, around 700 users intel/...
Hello,Currently I've created a design which for HDD office and I observe high utilization (70-80%) on APs with breaking Teams sessions as a (annoying!) symptom The APs (9800WLC+CW9166i) have peaks with 45 - 50 users per AP, 95% of users are 5GHz, b...
Hello,I've just received new C9166i APs, they have 3 radios installed (2.4G/5G/6G).Can I set the Tx power per radio or only per AP -so for all 3 radios ?Regardless the answer -is this a general rule for all CISCO APs or some models are different and...
I made the simple test:I changed the Guest-Portal timezone to Australia (without possibility to change it during the registration).Result: the guest-user (being in UCT timezone) is able to finish the login and connects to the wireless network -but no...
I've found this: High Channel Utilization due to high interference on 6GHz channels CSCwr37495 Customer found issue Symptom: High Channel Utilization, specifically on PSC channels. Conditions: Highly dense AP environment with APs reporting severa...
these are the worst stats in all three RF's in menu of WCAE ... and only for 6GHzwhy AP's cannot use non PSC channels ...?is the configuration of 6 PSC (5, 21, 37, 53, 69, 85) channels with 80MHz width the only possible one ?if yes ... we'll ...
Yes, nothing else except "my AP's" -this is a "stand alone" building, the closest is located across the street - so no chance for external rogue-source in 5 or 6GHz.I've tried to do this in "manual mode" but I was -let's say- outvoted...I've heard th...
