Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi all ,I am upgrading 6500 switch from old ios to new one and the new one requires 512/512 memory to be free below is the show ver and sh sup-bootflash , please tell me how is it calculated as well thanks Suhailsw-cta2-i8-off>sh verCisco IOS Softwar...
Hi all,I wan to migrate from a router 2800 to L3 switch 3750G , the thing is that we have several vlans and we use a router sometimes with each interface configure with correspoinding vlan subnet ip to route traffic between vlans there is no static o...
Hi all,Today one user came to me and said his tacacs account is not working anymore , so i reset his password , but it did not work , so i delted the user added a new account for him , but it did not still work i got error authorization failed , i ad...
Hi all,Below is the show ver of 6509 switch , please i need some assistance how to enable netflowalso i cannot enable ip route-cache flow on ten gig interfacessw-cta1-c6-bc(config)# int te1/1sw-cta1-c6-bc(config-if)#ip rousw-cta1-c6-bc(config-if)#ip ...
The pings are failing to directly connected interfaces, i dont understand as to why !!!!!!!!!!!!!!!1 Switch# sh cdp neiCapability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - R...
well this is how i configured today , but some of the services did not work at the application level and would it also be due to the following commands missing on switch :ip cef no mop enablespeed autoip forward-protocol ndBelow is how i configured i...
