Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm sure this will be simple for most of you. I just have never done it. We have an MPLS WAN and we qos various traffic into Normal, Priority, Critical, Video and Voice planes based on default qos markings or ip address.I have a couple servers that a...
Hello, I have a 6509 with 2 X sup 720's and 3 x ws-x6748-ge-tx. Our server team has 3 Data Domain backup servers that move Hundreds of gig's of data between them each day. Redundancy is not required. Where would I plug these in for the very fastest d...
What permissions need to be given to users placed into the CCAA Temp role to allow the Symantec Anti-virus to update? Does the Clean Access Server get the updates and give them to the client or does the agent fire-off the live-update of the anti-viru...
I have recently discovered that the technical specs for the PIX501 and 506, and also the Cat 6509 show operating altitude limitations of 6000 feet. I run a network at 7700 feet and have two smaller networks at 9600 feet. I currently have a 6509, a pi...
I have web servers that we do not manage. So I want to put them on the outside of a second pix we just bought. Users from our LAN need to get to them but not users from the internet. This is easy. I'm now trying to find out how to allow these web ser...
I don't know if you solved this yet but here is how I fixed the same issue.I made sure that both interfaces were set at 10 full. Most importantly I made sure that only the necessary vlans were allowed on the trunk. (in our case the native vlan and tw...
I was actually thinking of going that route. I'll see.You mentioned I could allow those web servers access to the internet by opening a hole in the 506. What would be the best way to do this? It might be something I just do temp for the updates and t...
