Thanks. ... View more

Thanks Nadeem for replying. I only need to allow people to connect to my SOHO PC. The user I'm testing with is coming from behind a PIX 515 running ver 5.3.(4). I don't receive any video. I added the following line to my config: fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 static (inside,outside) x.x.x.x y.y.y.y access-list acl-out permit tcp any host x.x.x.x eq 522 access-list acl-out permit tcp any host x.x.x.x eq ldap access-list acl-out permit tcp any host x.x.x.x eq 1503 access-list acl-out permit tcp any host x.x.x.x eq h323 access-list acl-out permit tcp any host x.x.x.x eq 1731 Does the user behind the 515 need to add any lines to his PIX 515? Thanks ... View more

Thanks that worked! ... View more

Thanks! ... View more

I still can't get it to work. All I want to do is setup a website behind the PIX. I'm using IIS 6.0 behind the PIX 501. I using a cable modem and use the outside interface IP I get from the cable modem folks. [It's DHCP] Here is a copy of my config from the home pix: PIX Version 6.3(1) interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable passwordxxxx passwd xxxx hostname homepix domain-name xxxxxx.com fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol ils 389 fixup protocol pptp 1723 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 names access-list 101 permit tcp any host xx.xx.xx.xx eq pptp access-list 101 permit gre any host xx.xx.xx.xx access-list 102 permit tcp any host xx.xx.xx.xx eq www pager lines 24 logging on logging host inside 192.168.1.10 logging host inside 192.168.1.12 logging host inside 192.168.1.19 mtu outside 1500 mtu inside 1500 ip address outside dhcp setroute ip address inside 192.168.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm pdm location 192.168.1.10 255.255.255.255 inside pdm location 192.168.1.12 255.255.255.255 inside pdm location 192.168.1.19 255.255.255.255 inside pdm location 192.168.1.2 255.255.255.255 inside pdm location 10.10.11.0 255.255.255.192 outside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp xx.xx.xx.xx www 192.168.1.15 www netmask 255.255.2 55.255 0 0 timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius aaa-server LOCAL protocol local http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-pptp telnet 192.168.1.2 255.255.255.255 inside telnet 192.168.1.12 255.255.255.255 inside telnet 192.168.1.19 255.255.255.255 inside telnet timeout 5 ssh timeout 5 console timeout 0 vpdn username Lane password ******** vpdn enable outside dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside dhcpd enable inside terminal width 80 Cryptochecksum:xxx homepix# ... View more

Hi Luis, I plugged the Motorola ATA into one of the 4 available ports in back of the PIX 501, and I don't receive any dial tone at all. Has this ever happend to you? How did you set up your ATA? Thanks Paul Lane ... View more

Jay, Thank you for your reply. It looks like the FW is discarding the packet because it's using 127.0.0.88 as the source IP address. How do I know if the sysopt connection enforcesubnet command is enabled? Also what should I look for to determine if an external user is trying to compromise the protected network? Thanks, Paul Lane ... View more

Thanks you! ... View more