Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Experts, I have question on the Cisco ASR1001-HX Can we use these devices still for the production Data center setup ? may be next 3 years ? 1) What is the EOL?2) What will be best similar replacement please ?Thanks & Best RegardsYuvi
Hi All, I am having the issues while verifying the md5sum & sha512sum on the Nexus switch C93108TC-EX running with 9.3.11sw01# show file bootflash:nxos64-cs.10.3.6.M.bin md5sumError: /bootflash/nxos64-cs.10.3.6.M.bin: Value too large for defined dat...
Hi All, I have the following issue on the Production C4431 ISR routers System image file is "bootflash:/isr4400-universalk9.03.16.03.S.155-3.S3-ext.SPA.bin" Any idea what caused the HSRP to enter into "Unknown" state please? Thanks & Best RegardsYuvi
Hi All, I have the following situation, Today using the TACACS+ server (Linux based) for the TACACS user accounts on this server.This server ip is configured on the Cisco devices------------------------------------------------------------- tacacs-ser...
Hi Experts Community, Actually, in my production environment I like to have full 100% failover working for the F5 load Balancers those are connected to Cisco VPC pair switches, I am having the topology shown below. In this topology the green links ar...
Upgrade done , Version 17.12.4a, RELEASE SOFTWARE (fc2), I still see the following message in the console Log Buffer (102400 bytes):d tcp 6c9c.ed5c.2793 156.253.252.202(46501) -> 216.75.192.165(34567), 1 packetMar 10 12:54:39.335: %OSPF-4-INVALIDKEY:...
