Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
[added one month later ]Hi All,I realized that the IOS-XR Cisco DHCP server doesn't support this usecase. If anyone finds otherwise please let me know. Also, please note that the IPv4 Cascade isn't supported for use-cases that the client and server...
Hi All,I am trying to understand here if bare metal installation allow creating vSwitch settings similar to what I did in ESXI.I am after connecting the Server physical quad phy ports on to CML.That would allow me to connect externally over different...
Hello all,I am getting cornered into a case where may never happen but still I am trying to be prepared.In RTBH use-case the NLRIs (not important which Address Family) are usually advertised as /32 from a remote PE and normally they arrive via iBGP.I...
Hello community,Issue descriptionThis case is related to RTBH implementation over L3VPN.The device used is without exteral TCAM and scale optimization were modified based on the recommendationmentioned in System Security Configuration Guide for Cisco...
HI Community,I am running into an issue with VMware license consumption and need your input here.The setup is an ESXI workstation with 4 CPUs with 8 cores each (old ...)Apparently, VMware licenses are also required to operate on CML installed as OVA....
Hi Rmblin (and also others that use bare-metal)What is the downside that you face with that installation? Other than the flexibility to use the server for more purposes?
Thank you,I the question is more geared toward how to count per cause. There are different recursive paths resolved into null0. There is some expectation to be able to count per cause - i.e.Path resolved through 192.0.2.1 counted seperatarly and coun...