Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello.Can anybody explain the following. IOS Feature navigator for c805-y6-mw.123-9.bin does not list CBWFQ and LLQ among available features. But the foolowing configuration works:class-map match-all voice match access-group 194class-map match-all si...
Hello. Can you help me with the following task: There is branch office with Frame Relay connection to the Central site. There is one PVC with only one DLCI. Is it possible to encapsulate IP traffic and X.25 traffic in this one PVC using AnnexG sta...
Hello. Does PIX performs ASA and stateful application inspection on traffic that is going through GRE tunnel. Our customer want to build IP tunnel through PIX to pass routing information from dmz to inside interface. But I think that it can decrease...
Hello.Can anybody tell me what string I should write into the following variable to upload running configuration from the router to tftp server.Name: writeNetType: OBJECT-TYPEOID: 1.3.6.1.4.1.9.2.1.55Numerical syntax: OctetsBase syntax: OCTET STRINGC...
When establishing IPSec connection through the router which performs NAT you should use transform sets which don't utilize authentication header or hashing. You can use pure DES, 3DES and so on.As for the your case you are trying use md5 hash:inbound...
You use this command when modem experiences short outages and a result of it interface can come into loopback state. The signal to enter the loopback state comes into interface through pin #18 of RS-232. The command you specified makes interface igno...
Access list only applies to packets which traverse PIX and not terminate on it interfaces. If you want PIX interface to reply to ICMP echo packets you should use the configuration command:icmp permit IP_address netmask Interface_name
You use this command to tell the router to regard looped interface as down. In this case router choose another path to route packets via dynamic routing or via another static route. Route, which points to interface which is down is automatically rem...
