Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
stuck in "TCP_CONN_ERROR" error state
After re-configured " ip source-address 192.168.87.1 port 2000" under telephony-services. Now Connection is Active and conference working.
But when I restart the router again it went to "TCP_CONN_Error" no co...
User is having ISR8300 routers. Here there are using p2p connectivity with 5 uplinks and down the line from switch to router Encrypter link and non-encrypter link has been connected.
Now the challenge is.
Encrypter link traffic should go through the...
I have isr 8300 series at each site user wants to use AES encryption for without creating ipsec. Actually user is using ospf for multiple stations.
Please any one help me out from this issue.
I have two ISR 4351 routers and I'm trying to esatliblising connectivity between 2 routers with serial interface. Is it possible to connect with different subnets?
R1# serial 0/0/0
ip address 192.168.1.1/24
encapsulation ppp
R2# serial 0/0/0
ip add...
Hi Everyone,
Still My problem was not resolved. I have tried multiple thing but it's waste of time.
Today i have taken tac support they suggest me to write EEM Script with ipsla in router.But my question is how switch will know's to shift ENC_link to...
@rais Yes i have tried vrf and PBR. As per above scenario PBR is not working.
Today, I have tried with acl's it's working now From Encrypter to Router uplink( Radio, E1&t1, CUC) and from Non-Encryption to Router (VSAT link) working.
Thanks everyone ...
@rais No, here i'm not configured lag.
I used ipsla for both links. see, that only i'm asking All uplinks except 1 VSAT link traffic should go through Encryptor and Encrypter to router and desired uplink that means( Radio, cuc, E1,fiber)
And non-encr...
@rais that is just encryption box and it doesn't know any ip routing just in/out interfaces are there.
1. See First user requirement is when he is try to send any traffic it should go through the encrypter link and it reach to the router and router w...
