Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are having issues getting calls from a site in Guatemala, from a Panasonic IP PBX to connect to a site in Tampa, FL over a bonded 3Mb point to point T-1. The voice calls pass from a 2821 router to a 7206 router with voice capability. We see Error...
We are connecting to a site in Guatemala and trying to use network dialing over our routers. We have a T-1 on a 2821 router and a E-1 connection on a 2821 router in Guatemala. We can call the destination and hear them but they do not hear us. Is th...
I receive the above error when the services button is pressed on 7960 IP phone. I have the services URL defined in the phone profile as http://server name/ccmcip/getservicesmenu.aspThis used to work. Services are defined on the user profile as well...
Is ther e a way to see the status of a 7960 phone without assistant? I just want to know if the phone is in use before resetting. In a Meridian PBX you can stat a phone and it will tell you if it is idle or busy.
It could be because of the E-1 to T-1 conversion but we actuallly we input bearer-cap speech on the voice port these calls were hitting and it cleared the issue.
I have done this with a middleware from Checkmate. We have been running it for about three years. The Checkmate software runs on a Virtual server. Another way is to configure QSIG on the PBX. CallManager supports QSIG.
We have this scenario working. You can use QSIG on the trunk that connects to the PBX. I will be implementing that soon. Or there is a 3rd party tool that works. We got the product through Checkmate. The product is now called Abridge and is suppor...
It is already set up this way. This was working until last Thursday. Then after resetting everything, CCM's, routers, PBX trunks,,, it still does not function going through the Hunt group.. It is like a secoondary forward has been turned off.
