Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey colleagues I have PI of the latest version 3.9 and I'm currently working on creating a couple of maps. I have nice and clean floor plans which were scaled appropriately by using the scaling tool. I have columns in my building so I'm not sure how ...
Hey everyone.I have an issue with a brand new ISE 2.6 distributed deployment which I upgraded to the patch 6.I added a first group of network devices and configured a test Device Admin policy. The authentication works perfectly however there're no lo...
Hi all, While I was configuring a service object at some point I realised that I made a mistake and wanted to remove it. object service TCP/8443
service tcp destination eq 8443
FW(config)# no object service TCP/8443
ERROR: Character '/' is not all...
Hello colleagues, Overview:5508 WLC, 802.1x SSID + Radius on Cisco ISE 2.3.
ISE features in use: Radius (No profiling, etc. Just AAA), Tacacs.
Issue: Cisco ISE consumes 388 base license while having only 47 active endpoints. As it was stated multipl...
Hello colleagues, WLC 5508 / 2504 8.3.112 PI 3.2 SNMPv3 AuthPriv I haven't found any way to restrict the SNMPv3 communication with an ACL that points to NMS/32. However, it's possible for SNMPv2c via config snmp community ipaddr ip-address ip-mask na...
That's correct, the problem came back even on the latest patch of 2.3 in our environment as well.I also worked with the support in order to resolve this problem but we never did. I got the following bug ID though: https://bst.cloudapps.cisco.com/bugs...
Hello everyone,As discussed here's the final update.We verified and tried a lot of different workarounds with TAC however nothing helped.During the last troubleshooting session the node that had its hostname changed previously did not even understand...
Hey @Marvin Rhoads & @Damien Miller Thanks for getting back to me.Yes, I'm working with the TAC on that. Posting the last update for the future referenceActions performed so far: Regenerated ISE root CARegenerated a certificate for the ISE messaging...
Hi Marvin,Unfortunately it did not help.Looking at the bug ID, I see there's a condition "ISE root CA moved to Intermediate CA role. Specifically, the ISE CA certificate issued by another Root CA.". This wasn't done in my deployment. Even if I disabl...
Hi Marvin,Thanks a lot!Yes it looks like I have similar errors in the logs.I'll investigate how to implement the fix and then post an update. Regards,Anton
