Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have an 871 set up at home with 2 VLANs, both of these vlans present a strange behavior where an user is unable to ping/contact another user on the same subnet, however if users are on different subnet it seems to workAccording to the trouble...
If the BGP route is istalled first in the BGP/RP table then you'll use the BGP path, but if you have an issue with the MPLS link, then you will install a backup path (EIGRP) this will trigger a redistirbution per your config from EIGRP to BGPFrom you...
Forgot to add bvi configinterface BVI1 description office ip address xx.yy.117.1 255.255.255.240 ip access-group FIREALL_inside_inbound_1 in ip admission Office_access ip nbar protocol-discovery ip flow ingress ip flow egress ip inspect one in ip tc...
Hola Emiliano, en este momento no se tiene soporte de anyconnect para blackberry ya que requiere aproval de RIM, La siguiente página tiene el detalle de los sistemas operativos actualmente soportados para anyconnect: http://www.cisco.com/en/US/docs...
Hola, Desafortunadamente no existe un show run o algo similar para ver en configuración algunos parámetros por default, tiene que ser vía un show del objeto que traigas, por ejemplo en un show run interface gigabitethernet no vemos la velocidad ni d...
