Hi,How can I verify the compatibly between Nexus 5548UP and Qlogic FC switch module? The NX-OS release compatibility matrix includes only Brocade switches but doesn’t list any Qlogic FC SAN switches. In my design the nexus 55k will be connected to Ql...
Hi,can i connect a 6100 Fabric interconnect directly to the NExus 55k over an FCoE link? Does multi-hop FCoE spans 55k and 6100?we have this scenario: 6100-->N55k-->Storage or (6100-->N55k-->N55k-->Storage)Can the UCS blade servers communicate with t...
Hello,I need help to answer the following questions related to interconnecting 2 campuses (Upper and Lower in the attached diagram), using the Nexus 5K FCoE ports: Kindly check the attached topology. QUESTIONS:Multi-hop FCoE:· Can the link (1...
Hi,Can anyone please confirm this:Connecting an FC Storage Array directly to the FC NAtive ports of the UCS or Nexus 5K (and not through an MDS or Brocade switch) is supported and requires FC-SW mode and not NPV mode:For Nexus 5K: It can run in FC-SW...
Hi,Any idea how this autodiscovery works in a redundant setup? where i have 2 WAE in the Head office and 2 WAE in the DR site. How will the 2 WAE in the HO peer with the 2 WAE int he remote site?thanksAutodiscovery of WAAS DevicesCisco WAAS includes ...
Hi,but it's clearly mentioned in the datasheet that it's supported in third-party servers that support IEEE802.1Qbh capable adapter!http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/data_sheet_c78-657397.htmlthe offering can now be e...
Thank you Robert for your answer.Indeed, the problem was on the uplink switch. It was solved by configuring the uplink of the server on the upstream switch as Trunk! (i was mistakenly configured as access).Thanks Michel
Hi,i'm having similar issue: the VEM insatlled on the ESXi is not showing up on the VSM.please check from the following what can be wrong?This is the VEM status:~ # vem status -vPackage vssnet-esx5.5.0-00000-releaseVersion 4.2.1.1.4.1.0-2.0.1Build 1...
How!?! it's clearly mentioned in the document you attached that the vic2-2fxs is NOT supported on Cisco 2900 routers.It's listed under the "Unsupported Modules on New ISRs"