Hello,I have EzVPN configured in routers and asa5505 as a client and ASA5510 as a server, but I can not get through aaa authentication (accounting & authorization too) in both cases, and snmp on the asa5505 case.Traffic between LAN behind router and ...
Hello, I want to know if I can set network mask when I use ACS to assign the ip address. I have had some problems when I use split tunnel since the computer (the client side) routes are sending packages with the ip address assigned by the ACS intead ...
Hello,I am trying to connect an apple iphone with my ASA using split tunnel, so the user can be connected to our internal server and to the internet; however, when I configure the split tunnel the iphone does not connect with my ASA. If I change to t...
Hello,I have two ASA5510 configured as vpn concentrator for network extension with some pix501, they are located in different buildings. I have connections and the tunnel gets up in any side with no problem, but in one of them I have no traffic. I ha...
Hi,I have two switches, one 3550 and a 3750, wich are connected using single mode fiber. The link works well with a basic configuration: switchport trunk encapsulation islswitchport mode trunkbut when I activate a full trunk configuration as follows:...
Thank you. I'll try it and let you know.Do you have an idea why DAP is compulsory in the ASA. I would like to use group policy since I feel is more flexible.Regards.HUGO
Ok thank you.By mistake, now I must say that, I have used native vlan before which already is in my configuration. Since I read about using a dummy vlan I decided to implement the change in this case. Since vlan 999 and 203 actually do not exist in a...
Hello,Thaks a lot for your answer.The vlan 999 it is not declare in any switch since I understood this a dummy vlan. Additionally vlan 203 it is not in the vlan database since it will be used in the future, but it is not being used now. Can be that t...
