About facundo.ag

facundo.ag · 12-25-2019

Hi, I have an ASR 9001 (IOS XR 5.1.3) with several BGP sessions in a vrf (vrfABC), and we would like to get via SNMP the prefixes accepted. The OID to get the table with all neighbors is CISCO-BGP4-MIB::cbgpPeer2AcceptedPrefixes.ipv4 (.1.3.6.1.4.1.9....

facundo.ag · 10-07-2018

Hi, I have an ASR9000v dual-homed with a ASR9001 and a ASR9904, and the switchover works fine. The ASR9001 is the Active host: and the ASR9904 is the Standby host: The IOS XR version is 5.1.3, and the asr9k-9000v-nV-px-5.1.3 package is commited...

facundo.ag · 07-01-2016

Hi, I'm having an issue with logging in ASDM (ASA 9.6 and ASDM 7.6). I like to set logging to "Warnings" in the "Latest ASDM Syslog Messages" pane, like this. But when I want to monitor logging with the "Real-Time Log Viewer", and view messages ...

facundo.ag · 04-21-2016

Hi, I just want to confirm if the ASR-9001 doesn't have an air filter. In http://www.cisco.com/c/en/us/td/docs/routers/asr9000/hardware/installation/guide/asr9001/asr9001HIG/asr9001HIGmaintaining.html#pgfId-1153264 says: The Cisco ASR 9001 Series Rou...

facundo.ag · 03-24-2016

Hi, according to the Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide : Step 1 Set your terminal to these operational values: 115200 bps, 8 data bits, no parity, 1 stop bits (115200 8N1). But the line configuration of an ASR-9...

facundo.ag · 07-02-2016

Hi Philip, clear enough for me, I misunderstood the options. Thanks,

facundo.ag · 03-25-2016

Hi Xander, thanks for the document, very good info. A few days ago I had a ASR-9000V-DC-E with the Critical Error LED on, and I was very worried when I read in this document: Critical Error LED comes ON => Critical hardware failure; need to swap 9000...

facundo.ag · 03-25-2016

Hi Xander, as always thanks for the quick reply, it's clear now. Cisco documentation is awesome, would be no surprise that it's ahead of the implementation :) Cheers, Facundo

facundo.ag · 03-24-2016

Hi, I found out what the issue was, I connected the other power source (terminal B) and the alarm gone away. Everything looks fine know.

facundo.ag · 03-22-2016

Awesome Bryan! It couldn't be more precise: SP is seen as active as well as inactive. When the SP contains the fix for an optional package and the corresponding base optional pie is not installed on the router the SP will be seen as active and inacti...

Member Since	‎09-15-2015 12:18 PM
Date Last Visited	‎01-01-2020 02:32 PM
Posts	19

User Statistics

User Activity

OID CISCO-BGP4-MIB::cbgpPeer2AcceptedPrefixes.ipv4.4.<ip_address> not working in vrf in ASR 9001

ASR9000v software upgrade (not latest version)

ASA logging level "Latest ASDM Syslog Messages" vs "Real-Time Log Viewer"

Does the ASR-9001 have an air filter without the air plenum?

ASR-9001 console configuration

Hi Philip, clear enough for

Hi Xander, thanks for the

Hi Xander, as always thanks

Hi, I found out what the

Awesome Bryan!