Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone,
I have a C1000-8FP-2G-L where almost once a week the sys led starts showing red led.
While reading the data sheet i found that red sys led means this "The switch failed ACT 2 verification. The configuration running on the switch is not ...
Hi everyone,
I was wondering what does a led blinking amber mean on switch C9300X-12Y.
To that port we have connected a dark trace appliance, in status monitoring. Traffic is only in Out, no traffic in In because in the monitor session this is the d...
Hi everyone,
One of our customer need to have configured some specific Encryption Algorithms on their switch WS-C3750X-24 version 15.0(1)SE3. This is his current ip ssh;
sw-core-1#sh ip sshSSH Enabled - version 2.0Authentication timeout: 120 secs; ...
Hi everyone,
Today we were trying to connect an ap 2802 to a 1852 mobility express. Firmware version is 8.5.161. They joined but the ssid didn't work. Anyone ever experienced this? Are they compatible?
Thanks
Hi everyone,
While trying to connect to Wi-Fi on a specific SSID, on a specific ap 9115, PCs connect normally while devices of type Android or iOS, they are rejected saying that the password is wrong, while on the other access points these devices ...
Hi leo, there it is
WI-CORE-CED1# sh int Twe1/0/1 controllerTwentyFiveGigE1/0/1 is up, line protocol is down (monitoring)Hardware is Twenty Five Gigabit Ethernet, address is Description: SPAN PORT DESTINATIONMTU 1500 bytes, BW 1000000 Kbit/sec, DLY 1...
Hi,
Yes i saw that guide but on this switch there isn't the command ip ssh server that we need to config the ssh algothitm;
sw-ced-3(config)#ip ssh ?authentication-retries Specify number of authentication retriesbreak-string break-stringdh Diffie-He...
Hi everyone,
The ap joined and therefore we installed the correct version so it didn't have to download anything.
Right now we're thinking of upgrading everything, thanks for the suggestions.
