Will it be possible to setup ospf on N1kV ? Where I can find examples ?

When I configure mac-pinning on my vm-umplink (see below) and 'no sh' second port on uplink switch (eth5/3 and 5/4 are connected to two different uplink switches) all my Eth are removed. Why ?<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<...

Should management vlan use a system vlan ? So for example 10/12 are control/packet vlans respectively and 132 is management vlan :port-profile type vethernet management  vmware port-group  switchport mode access  switchport access vlan 132  no shutdo...

I'm seeing too many VEMs after cahnging domain id from 25 to 35 how to remove old ones ?rsn1-1c-n1k# sh svs neighbors Active Domain ID: 35AIPC Interface MAC: 0050-5682-0005Inband Interface MAC: 0050-5682-0007Src MAC           Type   Domain-id    Node...

VEM packet vlan for some reason is   vlan 1# vemcmd show card.....Card control VLAN: 10Card packet VLAN: 1.......VSM is set to use vlan 12 as packet vlan , how do I change now ?rsn1-1c-n1k# sh port-profile virtual usage ------------------------------...