I need to setup the UC520 SIP Trunk to CenturyLink. Within CCA, I don't see CenturyLInk listed from the vendor list. Anyone have experience with CenturyLink configuration?
I have a UC560 configured to use SIP trunks for all incoming and outgoing call. I'd like to have an analog PSTN line for outgoing in case of emergency.Do I need to perform any configuration? Seems like I can dial out thru analog after I plug in the R...
I have a UC560 with PRI setup at the primary site and like to setup another UC at a remote site. What's the easiest way to change the default IP address of CUCM and CUE for the remote UC?The 2 sites are connected via MPLS. Can the remote site have a ...
The remote IP phone is not registered to UC560. I can ping the remote phone IP from UC. The remote phone can ping the CME ip and data vlan IP on the UC.
I can access the Call Manager Express which is on the data VLAN but not the UnityExpress on the voice VLAN. Do I need to setup the voice VLAN at remote sites? The remote sites are small and less than 10 users.