About MI-MAB

MI-MAB · 03-13-2026

Hi Folks,we have integrated Webex systems with 3rd party control systems (Extron, Crestron) using the UI Extensions, this works fine.We have a case where no 3rd party control system shall be installed. From a macro in the Webex a 3rd party video matr...

MI-MAB · 01-05-2026

Hello Community,a customer uses Room Kits (Pro/EQ).The audio system is quite large, uses Dante.Due to security concerns we do not want to connect the audio system with AES67, but use USB audio on the Cisco.I proposed to go for the Audinate AVIO USB a...

MI-MAB · 10-07-2025

Hello community, a customer wants to add room controls to an existing EQ Kit.We are familiar with the control side (Extron, Crestron, etc.) and how to configure the widgets in the Cisco.The question is, if the Cisco requires a license for this applic...

MI-MAB · 08-19-2025

Hi Folks,we installed a divisible room, each room has its dedicated Codec EQ and Touch 10.A control system detects the sleep/wake status of the Codec EQ based on the HDMI outputs, which are connected to a 3rd party HDMI matrix.When the rooms are comb...

MI-MAB · 12-02-2024

Hello community,one of our customers wants to control the AV system and in room functions from the Cisco Touch 10.In fact, there are two Touch 10, one in each room.We use Extron control, a driver for the Touch 10 is available, so far so good.Based on...

MI-MAB · 03-15-2026

Thanks Sandip,we will add an external controller (Crestron, Extron, AMX) and use the UI Extensions.Thanks again for informing, we really appreciate the support in this community!Best regardsMI-MAB

MI-MAB · 02-18-2025

Thanks John,I was able to implement a solution as follows:- create 2 panels in the codec, one for the combined room, one for the separate rooms.- create a hidden panel with a text field with widget ID "Roomlayout"- send text "combined" or "separated"...

MI-MAB · 12-20-2023

Thanks for the fast replies, much appreciated.Stay healthy!MAB

Member Since	‎12-20-2023 06:45 AM
Date Last Visited	‎03-13-2026 06:33 AM
Posts	9

User Statistics

User Activity

Control an external device from a macro using TCP or SSH

Dante to USB adapter for WebEx Room Kit

EQ Kit: Is a license required for 3rd party control using widgets?

Webex Codec EQ wakes up when physically disconnecting Touch 10

In room control (Touch 10) integration for divisible room

Re: Control an external device from a macro using TCP or SSH

Re: In room control (Touch 10) integration for divisible room

Re: Webex Room Kit EQ and Sony SRG-X400, Camera control