About useridisblank

useridisblank · 02-02-2022

Recently we upgraded a stack of 3650's. The upgrade process was successful and the switch elected as master booted as switch 1. The issue was that switch 1 had a confreg of 0x142 and not 0x102. In looking at other switches within the environment that...

useridisblank · 02-12-2020

I'm attached to the DNAC via the CIMC KVM and I am prompted to enter my credentials. I enter what was configured during setup, and I get an auth fail. Attempting to join box #2 to the cluster results in an auth fail. SSH to the box and I can login...

useridisblank · 12-18-2019

The AVC Database is quite comprehensive. We would like to add a new application, or at least add an entry specific to an IP address and not necessarily port number to tag the CAPWAP traffic at the router. Is there a way to edit the DB, or, is there...

useridisblank · 02-03-2022

@Reza Sharifi First of all, thank you for taking the time to reply back to the question. What you've suggested is correct, we can console into each switch within the environment and manually check. We want to prevent having to do that which is why I ...

useridisblank · 02-03-2022

@Reza Sharifi This is not an option: Switch#show switchSwitch/Stack Mac Address : dc77.1111.2222 - Local Mac AddressMac persistency wait time: IndefiniteH/W CurrentSwitch# Role Mac Address Priority Version State---------------------------------------...

useridisblank · 02-02-2022

Here is the example: Current state of switch 2 as primary / master. Typing show version displays confreg of 0x102 (which translates to 0x2102) Say switch 1 has a confreg of 0x2142, you can't see what it's configured as unless it is master. Switch 1, ...

Member Since	‎06-29-2009 06:12 PM
Date Last Visited	‎09-05-2024 08:19 PM
Posts	7

User Statistics

User Activity

Show configuration register on stacked switches

DNAC login / cluster join issue

Cisco WLC (8540) running 8.3.150.0 - Edit AVC Database

Re: Show configuration register on stacked switches

Re: Show configuration register on stacked switches

Re: Show configuration register on stacked switches