Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Are the transmit and receive speeds from the router's standpoint or from the user's modem's standpoint? Thanks.sh modem 2/2Mdm Typ Status Tx/Rx 2/2 V90/92 Conn 53333/24000
Greetings,I have several remote offices. Each remote office router has 2 links coming back to the main office: dual T1 ATM IMAs connecting to a 6509 and single T1s connecting to a 7507. All traffic goes across the ATM links, even when they're saturat...
I would like to create an EIGRP neighbor relationship between my inside router and my Internet router. There's a PIX firewall in between the two routers.Any idea if this is possible?Thanks in advance.
Below is how I have it configured on my network with the WoL packet going to many different subnets at different locations from a central server and it works fine.Define an ACL with a WoL server source IP address and WoL port number:access-list 101 p...
-If you have an IP address pool defined on the router you can reference that against the number of users that are dialed in. With the pool below I can have 251 users dial in and get an IP address.ip local pool IPPOOL 10.1.1.3 10.1.1.254-To get the mo...
