samarjit dutta

samarjit dutta · 12-08-2019

Trying to learn Segment routing :) I am trying to setup a SRTE ODN scenario as per the following top...

samarjit dutta · 11-19-2019

I have created one tunnel from PE1(CORE7) to PE2(CORE10) with the following CLIs. Such tunnel is up ...

samarjit dutta · 11-19-2019

One correction ....In the explanation, by mistake i mentioned CORE11 as CORE10.CORE11 is SRPCE and R...

samarjit dutta · 11-19-2019

Topology BriefThree isolated IGP domains AGG-A, AGG-B, CORE running ISIS level 2 onlySegment routing...

samarjit dutta · 09-12-2019

I am also using 6.4.2. I saw your reply on the other discussion ...https://community.cisco.com/t5/mp...

samarjit dutta · 09-11-2019

Intention:Forwarding traffic destined for vrf A & traffic destined for R6 l01(66.66.66.66/32) based ...

samarjit dutta · 01-26-2019

In above topology area 1 and area 0 is SR-enabled but area 2 is LDP only. I leaking both PE's loopbc...

samarjit dutta · 01-24-2019

76 views but ... no reply. still waiting .... :)

samarjit dutta · 01-20-2019

In the above LAB topology I have 3 MPLS RSVP TE between the PEs( 1.1.1.1 and 8.8.8.8). I like to ach...

samarjit dutta · 05-10-2018

I was facing the same issue and came accross to this discussion. It will work normally without area ...

samarjit dutta · 11-03-2015

supoose R2's best route to R1 ( via R2- R1 link) has a metric m1.and R3's best route to R1 ( via R3-...

samarjit dutta · 10-06-2015

Is it possible to apply such acl on trunk port?

Date Registered	‎08-19-2012 04:39 AM
Date Last Visited	‎12-15-2019 07:58 AM
Total Messages Posted	13
Total Helpful Votes Received	5

Is speific route is required for SRTE ODN ?