Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I'm looking for a way to manage an ASR 9K via inband and outband.
Via inband is easy. But how does an configuration looks like for outband?
I tried the following:
vrf MGMT address-family ipv4 unicast
interface MgmtEth0/RSP0/CPU0/0 vrf MGMT ipv4 a...
We have the current situation: - using Cisco ACS Unix 2.3.6- external Authentication RSA ACE Server VPN 3000 for VPN Access - uses radius dictionary IETFLucent Max 4000 for RAS - uses radius dictionary ASCEND Currently depending on NAS we can provide...
Hi,currently we are using ACS Unix. There it os possible to assign static IPs to a user based on the radius dictonary. e.g.NAS1- Ascent Max uses dictionary Ascend gets 10.1.1.1NAS2- VPN 3000 uses IETF gets 10.1.2.1Any ideas how this could be resolved...
Hi!We are using failover-bundles. As service the next business day option.What occurs, if on Friday the primary unit fails and the replacement unit comes on Monday? I read, that without failover connection the secondary (failover license) will reboot...
Hi, normally outgoing traffic in BGP is manipulated by local-pref. But this is based on target IP addresses, not on source addresses.Manipulation on source addresses could only be done by policy based routing. www.cisco.com/c/en/us/td/docs/ios/12_2/q...
Hi,that's seems to be strange>access-group 100 in interface outside >access-group 300 in interface outside I would configure the followingaccess-list 100 extended permit tcp any host 192.167.50.2 eq smtp access-list 100 extended permit tcp any host 1...
Hi,here you find the needed informations:http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps7180/prod_brochure09186a00801f0a72_ps8768_Products_Brochure.htmlCisco 1841 Integrated Services Router with onboard VPN - up to 45Mbit/...
I build such a scenario for a colleague. Instead of using MPLS I use a WAN-link (doesn't matter).I only backup ASA 2, but it should run in both ways.Routing protocol RIPv2Internet |ASA 1 |inside - 192.168.16.0/21 |WAN |inside - 192.168.32.0/21 ...
