Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm looking for some best practices for setting up a trunked Etherchannel between two 9300 switch stacks. We have had issues with Etherchannel setup since moving to the 9300 platform. I've always configured a port channel > then setup my interfaces w...
Hello, I've used the ASA 5505 for years and recently got some 5506-X units in to setup as home office devices for users working from home. I knew there were some differences but I'm confused on a few things when comparing the configs between the 5505...
I'm having an odd issue on one users workstation. I recently upgraded our ASA to version 9.13. I have two VPN images in flash with 4.7.02.036 being the primary image. When the user connects to Anyconnect it starts an upgrade process which includes re...
We are running version 5.2.0.26.4 of Cisco Secure ACS. We are using it to control access to our wired network and only allow our Cisco phones and our domain computers on the network. We use MAB for the phones and dot1x for the PC's. The system works ...
I'm trying to understand how Unity hanldes calls using the transfer rules and greetings. I've got a subscriber whose standard greeting is set to send them to a call handler. Since the call is being transferred from the subscriber would it use the tra...
I did end up getting one standard gig port up and was able to pull in my VTP info and assign an IP on our MGMT VLAN so I could get to the device remotely. I did try one port at at time with the module ports and it goes into err disable as soon as I d...
I hadn't considered that the module ports might be a little different that the standard gig ports. This is a stack in an ESX server rack for the many connections an ESX servers needs. The stack it's connecting to is another 9300 stack with other stac...
