Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have multiple site-to-site VPN's between my PIX515E and outside networks. One, a PIX 501, had network problems for a couple days, then once the ISP fixed the issue, I saw traffic trying to get from my site to theirs, but using a different ISP remo...
I've turned on Frame Relay traffic shaping, but it is still inactive even though it looks like I'm getting BECN's:GATEWAY#show frame pvc 37PVC Statistics for interface Serial0/0 (Frame Relay DTE)DLCI = 37, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INT...
I have a SSID setup with a 128-bit WEP key with a Cisco 1200 AP and a Symbol LA-4123 802.11b card (don't ask why). When I remove the 128-bit WEP key, I can connect to the network, but when I apply the key, no connection.With Symbol being such a big ...
I have 2 different VLANS using two different encryption types. (vlan 15 uses LEAP, VLAN 44 uses WEP). LEAP users authenticate against Cisco ACS. I want the WEP VLAN to authenticate using Open Standard plus MAC authentication with the MAC stored in ...
We use a software package deployment tool called Prism, and I create a package and it works fine that way. For people without 3rd party systems, I did find you can download WinInstallLE which is a free app that does the same thing, but saves the pac...
There is a software deployment piece of AD, but it uses *.msi files instead of *.exe files. I'm not sure how to get the *.exe file from the agent kit to a *.msi file. I guess I could use a login script and point to the http://server/agentkit.exe bu...
switch#vlan databaseswitch(vlan)#vtp domain TESTswitch(vlan)#vtp mode serverswitch(vlan)#vlan 17 name TESTVLANFor the test though, you need to know how to configure in vlans in config mode.
