I am having a problem with my ACL configuration on a 1720 router. When users try to surf with the following ACL they get blocked:ip access-list extended PERIMETER permit udp host 17.29.14.73 host 21.31.116.209 eq isakmp permit esp host 17.29.14.73 ho...
I thought I was out of the woods with this one but I'm not. I was able to get the site-to-site tunnel up when I originate traffic from the 172.18.3.x/24 subnet going to the 172.22.3.x subnet but not the other way around.I get this with debug crytpo i...
I am having a problem getting a site-to-site VPN config working. When I generate traffic from the 172.18.3.0 subnet to the 172.22.3.0 subnet I get the following error on the ASA:ASA5510# Oct 13 18:25:23 [IKEv1]: Group = 203.33.116.209, IP = 203.33.11...
Let's say you have two locations, connected via PPP, in a centralized call processing model. Each location is configured with 256 Kbps for bandwidth. How many G.729 calls can be placed between locations simultaneously?
I recently ordered a Cisco ATA 186 to install analog trunks between a Cisco UCM PBX and an Avaya CM PBX. To my dismay I have learned that the ATA 186 does not send digits out its ports and thus cannot interface with a PBX.Can anyone suggest a cheap a...
The mixup in IPs is "cosmetic". Treat the 74.92.14.73 address as if it were 17.29.14.73. I tried changing all the IPs to protect the innocent but obviously I missed one. Oh well.
So the VWIC2-1MFT-T1/E1 card is for the voice PRI and the HWIC-1CI1T1-PRI is for data? I thought the Multiflex T1 cards could handle both voice and data:"The Cisco 1 and 2-port T1/E1 Multiflex Voice/WAN Interface Cards ("Multiflex VWICs") support voi...
So the VWIC2-1MFT-T1/E1 card is for the voice PRI and the HWIC-1CI1T1-PRI is for data? I thought the Multiflex T1 cards could handle both voice and data:"The Cisco 1 and 2-port T1/E1 Multiflex Voice/WAN Interface Cards ("Multiflex VWICs") support voi...