Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello , Do the 4SFP uplinks on the 2970TS-E can be all active ? As well , it says it has an L3 and L4 architecture , does that mean it routes and content switch in HW ?
I have a root AP with 6 dbi wall mount patch anntena , I still have uncovered area and I can only use repeater , this is an outdoor area (planes RAMP)that looks like a soccer field with 280 m distance from the root AP to the edge . Can I use repeat...
I can not find enough info to explain the use of splitter , I have this scenario I hope someeone can advise . I have a small building with one floor and a roof , Doing the site survey with different positiong of the AP , I can cover the floor but no...
Can I use the 2.4 GHz,12 dBi Omni Mast Mt. Antenna w/RP-TNC Connector on AP 350 to communicate with client adpaters with 2.2 DBI integrated antenna within an outdoor area of 200m*300M ? I will do the survey if it is valid.
There is no way from LMS and not even from Unified Operation Manager - UCOM .. I searched many locations try to find the DB schema for the CCM as it must be thee somewhere but no luck yet , i ended up doing it manually for 1K phones .. I regret I d...
Thanks man but you got me confused , do u mean the hidden node can't communicate with the other nodes ? Can I refer me to some references for splitter use and considerations .
Thanks man , I idid configure teh switchport on teh switch for dot1q tagging , I have the 1100 AP and not the 350 , I have no problem in teh creation of VLAn at the core, edge and AP , all ok according to VLAN status . I wonder if this is a RADIUS r...
