Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,We have this network (please refer to the attached file) which I want to configure loadbalance and failover on the remote site using EIGRP. How can this be done? Please note that links on the remote sites has different bandwidth.Your help is m...
Hi All,Is it possible to have only one dhcp server which will serve multiple vlans?Im planning to have this kind of setup on our network. I will create minimum of 5 vlans on our core switch and the dhcp server will serve this vlans for the ip address...
Hi All!Is there any possibilities on how to prevent or even stop a rogue DHCP server giving bad IP addresses?We have a ligitimate DHCP server on our campus LAN that gives the right IP address for our dhcp client workstations but sometimes, a rogue DH...
Hi All!Is there any document that I can read on how to integrate Cisco 3825 with VWIC2-2MFT-T1/E1 to Alcatel OXO/OXE?Our client wants to:1. Cisco IP phones to call Alcatel's local number and vice versa.2. To use the Alcatel's trunk line for outside c...
Hi Douglas,What I know is you cannot assign multiple ip addresses on your asa outside interface or even on you inside and dmz interfaces unless you will be using VLAN but this will result on different network.If you want to put or publish your server...
