Hi all,I am seeing quite a high percentage (30%) of my packets being processed switched on a 2611 router. CEF is enabled on all interfaces.Would like to confirm if packets directed to a "secondary" ip address will be processed switched.As a temporary...

Hi all,I have a 3560 running C3560-IPSERVICESK9-M.Would like to ask if it is possible to configure an IP address on the primary pVLAN with this image, or do I need a metro IP access image to be able to do so?Looking forward to comments. Thanks.

Hi all,If a router receives an eBGP route from two of its iBGP peers (with similar weight/local pref/metric/as path)Is it possible for the router to put both next hop routers in the routing table or can only one "BEST" route be chosen between the two...

Hi all,I have a 2611 router running (C2600-IK9O3S3-M), Version 12.3(22), RELEASE SOFTWARE (fc2).I have been having problems with my interface counters on both int e0/0 and int e0/1Apparently when the input/output counters cross a certain threshold (4...

Hi guys,I would like to seek some advice on my network setup.pc running vpnclient (10.0.1.2)|<internet>|(int e0/0 dynamic ip)Cisco 2611 (NAT and VPN server)(int e0/1 10.0.0.1/24)|<ethernet>|server (10.0.0.100/24)with regards to the following setup, c...