Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good day;i am configuring cisco FWSM module on the cisco CAT6509 switch.Migrating from a pix 525.Immediately when i route traffic to the FWSM from the pix the cpu on the 6509 rises to 100% and i have observed that the process that is using most of cp...
hi,am trying to upload a customised web authentication page on to my wlc 4402.am using tftpd32 ver 3.23.the operation is failing,an i get the following error message on the tftp server.the file webathentiaction.tar is in the root directory of the tft...
heyis it possible to have vlans in a cisco switch being propagated to an Extreme x450-24Dt switch.our corp is running everything the cisco platform but one of our service providers has built for us an MPBN made of extreme switches and there is a need...
heyi have a WLC4402 with close to 20 laps.the Laps are broadcasting two wlans one for guest and one for corporate.recently i did an upgrade on the wlc from image 3.2.119.x to 4.0.219.0.now the problem is that the guest wlan cannot get ip address form...
hi Riccardo,thanks for your prompt response.So what would be a work around in an MPLS network that is running isis with 3750s as PE devices.How would we route ipv6 in this case,cnt changing the ios fix the issue.
hey am thinking that my file might be wrong,hos is the file suupoesd to be like because mine is is a couple of file put in a folder named x.tar(example)
