Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Wireless Experts,
I'm in a situation where we have two remote location's APs are connecting to one WLC in data centre through central switching. Each site has 3 SSID which are namely CORP (DHCP in data centre & distributed among the remote si...
Hi,can we stack two different 3750 models together ?Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- 1. WS-C3750V2-48PS 12.2(55)SE5 ...
Hi, I'm in a situation where i need to add the extra switch which is WS-C3750V2-48PS with C3750-IPBASEK9-M IOS to the existing stack which contains two ws-c3750x-24p with C3750E-UNIVERSALK9-M switches. And yesterday i tried to add the extra switch...
Hi William, if its for personal use and short distance the MM fiber would be more than enough and also make sure you use the right fiber cable to connect between the devices.
Hi Rasika Nayanajith,
Thanks for the doc, I'm going to try this solution. meanwhile i have a requirement to advertise Corp and Client SSIDs in the 5 out of 6 APs and i need to advertise Corp,Client and Guest SSIDs in 1 AP which is situated in Cafet...
Hi Naveen, if you are getting a junk message in console, then try rebooting the switch. if the issue still persists then you need to log a call with your vendor for the replacement of the switch.
Hi, Yes am adding 3750V2 to the existing stack. yes all the configuration has been erased and after connecting the stack cables i'm powering on the 3750V2 switch.
